Light Source Purlin Clamp (3/8 inch Fasteners) is perfect for installing almost anything to bar joists, purlins and I-beams up to 1 inch thick.
-
Curtains & Backdrops
add remove
-
Stage Curtains and Backdrops
add remove
- Sale Stage Curtains and Backdrops
- Stage Curtains and Auditorium Drapery
- School Stage Curtains and Drapery
- Church Curtains
- Backdrops for Stage, Studio and Theater
- Acoustic and Sound Absorbing Curtains
- Theatrical Curtains for Commercial, Architectural, and Themed Environments
- Arena Masking
- Rain Curtains
- Event Drapery
- Rental Drapes and Curtain Rentals
- Stage Skirting
-
Stage Curtains and Backdrops
add remove
-
Shop Fabrics & Hardware
add remove
-
Theatrical Fabrics
add remove
- Sale Stage and Theatrical Fabric
- Nylafleece® Nylon Puppet Fleece
- Velour
- Commando Cloth and Duvetyne
- Muslin
- Sharkstooth Scrim and Leno
- Keying Fabrics / Chroma Key Fabrics
- Canvas, Burlap and Gauze
- Metallic Fabrics
- Satin Fabrics
- Sheer Fabrics
- Textured Fabrics
- Lining Fabrics
- Event Fabrics
- Specialty Fabrics
- Acoustical Fabrics
- Projection Fabrics
- Stretch Fabrics
-
Pipe and Drape
add remove
- Sale Pipe and Drape
- Pipe and Drape Backdrops
- Pipe and Drape Backdrop Extensions
- Pipe and Drape Bases
- Pipe and Drape Uprights
- Pipe and Drape Drape Supports
- Pipe and Drape Panels
- Versatop™
- Pipe and Drape Accessories
- Pipe and Drape Storage Solutions
- Pipe and Drape Specialty Kits
- Table Skirting Accessories
- Pipe and Drape FAQ
-
Theatrical Fabrics
add remove
- Rigging add remove
- Tips add remove
- Get a Quote
Light Source Threaded Rod Hanger (3/8")
Reference: MBAT-TRH.375B
Light Source™ Threaded Rod Hanger for the Mega-Batten Clamp allows for connection to a Mega-Batten Clamp.
Light Source™ Threaded Rod Hanger for the Mega-Batten Clamp is a 1 inch by 1.25 inch by 3 inch tall machined aircraft grade aluminum body with a .5 inch by .75 inch socket shoulder bolt which allows for connection to a Mega-Batten Clamp. Gallery pic shows Threaded Rod Hanger installed on Mega-Batten Clamp.
Technical Specifications:
- 3/8" 16 TPI
- Working load limit (WLL):1250 lb (568kg)
- Available in black anodized
- Mega-Batten Clamp sold separately
*WLL is maximum load that can be applied to the beam clamp which is in "like new" condition and has been properly installed, maintained, and operated.
in the same category
Light Source™ Mega-Track Hanger makes hanging 140 or 300 series track from pipe grids or from individual pipes easy.
Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations.
Cross Grid Connector allows pipe to be added or removed in place without sliding them from the ends.
Light Source™ Mega-Gridlock Clamp is designed for permanent pipe grid installations in studios and theaters. Joins 2 overlapping pipes together in a 90 degree joint. Grooves act as a wrench holding the nut from turning while installing. Installs with a hex key tool in a battery drill.
Light Source™ Mega-Track Hanger makes hanging 140 or 300 series track from pipe grids or from individual pipes easy.
Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations.
Wall Flange is a special Steel Clamp for securing Grid Pipes to walls to prevent lateral movement of the pipe grid. Hardware for pipe is included. Does NOT include hardware for wall attachment.
Light Source™ Mega-Batten Clamp uses the same hardware and wrench as the rest of the grid system (1 inch x 5/16 inch socket head cap bolt 5/16 inch zinc plated nylon hexbolt). 1/2 inch hole in top for shackles.
Light Source Purlin Clamp (1/2 inch Fasteners) is perfect for installing almost anything to bar joists, purlins and I-beams up to 1 inch thick.