Colors shown may vary from display to display. Colors marked with an * are special order and cannot be purchased online. Actual fabric color may vary slightly due to differences in dye lots. Call 800-211-8217 if you would like to receive an actual color swatch or have a question about a color.
Light Source™ Mega-Coupler has a 1/2″ × 1 1/4" Hex Head Bolt with wing nut and solid nut tabs that won’t break off. It uses standard 1/2 inch by 1-1/4 inch long hex head grade 8 bolts to secure loads up to 1100 lbs. The bolt head locks into the hex-milled pocket so that you can tighten the nyloc nut while the clamp is installed. Mega-Coupler fastens from (1-1/4" Pipe) 1.66" OD to 2 " OD truss tube and has an industry compatible 14 mm thick base.
- Minimum size: 1.25" pipe, 1.66" OD pipe
- Maximum size: 1.5" pipe, 1.90" OD pipe, 2" OD truss tube
- Working load limit (WLL): 1100 lb (500kg)
- Available in black anodized or silver
*WLL is maximum load that can be applied to the beam clamp which is in "like new" condition and has been properly installed, maintained, and operated.