Light Source Mega-Coupler has a 1/2 inch × 1 1/4 inch Hex Head Bolt with wing nut and solid nut tabs that won’t break off. The bolt head locks into the hex-milled pocket so that you can tighten the nyloc nut while the clamp is installed. 

Light Source™ Mega-Batten Clamp uses the same hardware and wrench as the rest of the grid system (1 inch x 5/16 inch socket head cap bolt 5/16 inch zinc plated nylon hexbolt). 1/2 inch hole in top for shackles.

Light Source Swivel Mega-Coupler allows you to connect two pipes together at any angle.

Light Source 90-Degree Mega-Coupler allows you to connecxt two pipes together at a fixed 90-degree angle. 

Light Source™ Mega-Gridlock Clamp is designed for permanent pipe grid installations in studios and theaters. Joins 2 overlapping pipes together in a 90 degree joint. Grooves act as a wrench holding the nut from turning while installing. Installs with a hex key tool in a battery drill.

Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations.

Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations. 

Light Source™ Threaded Rod Hanger for the Mega-Batten Clamp allows for connection to a Mega-Batten Clamp.

Wall Flange is a special Steel Clamp for securing Grid Pipes to walls to prevent lateral movement of the pipe grid. Hardware for pipe is included. Does NOT include hardware for wall attachment.