Shop Light-Source pipe clamps, couplers and pipe grid connectors.
Subcategories
There are 10 products.
Light Source Mega-Coupler has a 1/2 inch × 1 1/4 inch Hex Head Bolt with wing nut and solid nut tabs that won’t break off. The bolt head locks into the hex-milled pocket so that you can tighten the nyloc nut while the clamp is installed.
Light Source™ Mega-Batten Clamp uses the same hardware and wrench as the rest of the grid system (1 inch x 5/16 inch socket head cap bolt 5/16 inch zinc plated nylon hexbolt). 1/2 inch hole in top for shackles.
Light Source Swivel Mega-Coupler allows you to connect two pipes together at any angle.
Light Source 90-Degree Mega-Coupler allows you to connecxt two pipes together at a fixed 90-degree angle.
Light Source™ Mega-Gridlock Clamp is designed for permanent pipe grid installations in studios and theaters. Joins 2 overlapping pipes together in a 90 degree joint. Grooves act as a wrench holding the nut from turning while installing. Installs with a hex key tool in a battery drill.
Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations.
Light Source™ Mega-Quick Pipe Splice quickly joins two pipes in line together without drilling or threading for permanent or temporary installations.
Light Source™ Threaded Rod Hanger for the Mega-Batten Clamp allows for connection to a Mega-Batten Clamp.
H&H Products 680 Batten Clamp is formed of 10 gauge steel for snug attachment to 1-1/2 inch schedule 40 pipe battens.
