Availability: 99999 In Stock
3/4 inch Throat Adjustable Beam Clamp is used for attaching chains or lines to beams for dead hung or guide wires.
Light Source Mega-Beam Clamp 10" (3 ton)
Reference:
$320.05
Ships in 5-7 days (See product description for additional notes. We sometimes experience delays with some fabrics/colors.)
Light Source Mega-Beam Clamp 10 inch (3 ton) is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible.
Light Source™ Mega-Beam Clamp is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. Two aircraft aluminum jaws are adjustable on a 3/4"-6 tpi Acme threaded shaft. Features a spring loaded handle which locks after adjustment. Aluminum construction is half the weight of steel clamps and allows for a wider gripping range. 10" model has a 3 ton rating.
Fastens from 2 inch to 10 inch wide I-beam flanges up to 1" thick. Center hole is 1-1/2".
Technical Specifications:
- Dimensions:16.5" L x 7.5" H x 2.75" W
- Center hole is 1.5" in diameter
- Working load limit (WLL):6000 lb (2720 kg)
- Available in black anodized or silver
*WLL is maximum load that can be applied to the beam clamp which is in "like new" condition and has been properly installed, maintained, and operated.
MBC3T-10M
999999 Items
Light Source Mega-Beam Clamp 10 inch (3 ton) is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible.
in the same category
7 other products in the same category:
Availability: 999999 In Stock
Light Source Purlin Clamp (1/2 inch Fasteners) is perfect for installing almost anything to bar joists, purlins and I-beams up to 1 inch thick.
Availability: 999999 In Stock
Light Source Mega-Beam Clamp 8 inch (3 ton) is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible.
Availability: 999999 In Stock
Light Source Mega-Beam Clamp 16 inch (3 ton) is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible.
Availability: 999999 In Stock
Light Source Mega-Beam Clamp 24 inch (2 ton) is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible.
Availability: 999999 In Stock
Light Source Purlin Clamp (3/8 inch Fasteners) is perfect for installing almost anything to bar joists, purlins and I-beams up to 1 inch thick.
Availability: 999999 In Stock
3/8 inch Throat Adjustable Beam Clamp is used for attaching chains or lines to beams for dead hung or guide wires.
Product added to compare.