Availability: 999999 In Stock
Light Source Purlin Clamp (3/8 inch Fasteners) is perfect for installing almost anything to bar joists, purlins and I-beams up to 1 inch thick.
Adjustable Beam Clamp (3/8" Throat)
Reference:
$24.19
Ships in 5-7 days (See product description for additional notes. We sometimes experience delays with some fabrics/colors.)
3/8 inch Throat Adjustable Beam Clamp is used for attaching chains or lines to beams for dead hung or guide wires.
Technical Specifications:
- Used for attaching chains or lines to beams for dead hung or guide wires
- Includes two 3/8" x 1" (9.5mm x 25.4mm) Grade 5 hex bolts with lock nuts, and 1/4" (6.35mm) round pin anchor shackle.
- 3/8" throat
- Grips flanges from 4" to 8" (102 mm to 203 mm)
- WLL*: 350 lbs (159 kg)
- Weight: 2 lbs
*WLL is maximum load that can be applied to the beam clamp which is in "like new" condition and has been properly installed, maintained, and operated.
999999 Items
3/8 inch Throat Adjustable Beam Clamp is used for attaching chains or lines to beams for dead hung or guide wires.
in the same category
7 other products in the same category:
Availability: 999999 In Stock
Light Source Mega-Beam Clamp 8 inch (3 ton) is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible.
Availability: 99999 In Stock
3/4 inch Throat Adjustable Beam Clamp is used for attaching chains or lines to beams for dead hung or guide wires.
Availability: 999999 In Stock
Light Source Purlin Clamp (1/2 inch Fasteners) is perfect for installing almost anything to bar joists, purlins and I-beams up to 1 inch thick.
Availability: 999999 In Stock
Light Source Mega-Beam Clamp 10 inch (3 ton) is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible.
Availability: 999999 In Stock
Light Source Mega-Beam Clamp 16 inch (3 ton) is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible.
Availability: 999999 In Stock
Light Source Mega-Beam Clamp 24 inch (2 ton) is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible.
Product added to compare.